Contact Us
Beaker Buy Small Quantity
Close
Call us at +1-800-274-1113 or
Home > Products by Industry > Water Treatment

Water Treatment

Pure chemicals supplies most efficient & effective chemicals for water treatment technologies and helps our partner industries to use & treat water in an economic way. With well-equipped modern technologies, scientists at Pure Chemicals are driving innovations that help to address many of our customer’s most challenging problems such as the need for clean water. Pure Chemicals offers a broad portfolio of water treatment products comprising of corrosion inhibitors, anti scalants, RO chemicals, reverse osmosis membranes, nano filtration membranes and fouling resistant membranes for several industries.

  • Cooling water treatment solutions
  • Boiler water treatment solution
  • Evaporator Antiscalant
  • Nanofiltration membranes
Water treatment chemicals are effectively used for the reduction and prevention of the three major issues of industrial cooling water system: corrosion, deposition, and microbial growth. Cooling towers are susceptible to a variety of contaminants that cause deposit formation, such as mineral scales and sludge. Deposition interferes with heat transfer, increases corrosion rates, restricts water flow, and causes loss of process efficiency and production. If not properly controlled, biological organisms such as algae, bacteria, fungi grow and act as a natural adhesion surface for scale formation, resulting in fouling. Pure Chems offers a full range of cooling water chemicals which provide excellent protection against these cooling system challenges. The powerful dispersant offered by us are blended in the products prevent fouling due to silt and suspended particles.
Corrosion and deposition are the serious problems faced by most of industrial boilers. The formation of deposits such as scale and sludge in a boiler system, results in elevated metal temperatures that cause tube failures and restricted circulation. Even a small reduction in boiler efficiency due to scale deposits, excess blowdown, or condensate loss can cause a huge increase in operating costs. Pure Chemicals boiler treatment solutions are being extensively used by industries to avoid scale, corrosion, or foaming.
Evaporator systems in various industries tend to accumulate salts. The Evaporator bodies have a deposition of carbonate, phosphate, sulphates and silicates. Our formulation of antiscalants are powerful scale inhibitors with a high dispersive capacity help in protecting the evaporators from scaling & deposits in multiple ways. They are very effective for Carbonate, phosphate, sulphate, silicate deposits. They thus helping retarding the scale formation in the evaporator and improve heat transfer by increasing the solubility of dissolved salts, reducing evaporator cleaning frequency.
Nanofiltration is a relatively recent development characterized by organic, thin-film composite membranes with a pore size range of 0.1 to 10nm. Unlike reverse osmosis (RO) membranes, which reject all solutes, nanofiltration membranes can operate at lower pressures and offer selective solute rejection based on both size and charge. This unique characteristic provides flexibility in separation process development that can greatly impact performance and profitability, especially for industrial applications. Pure Chemicals offers modern technology nanofiltration membranes (Nfm) that are engineered to provide optimal flux and rejection and can be customized to meet the unique requirements of specific process applications. These nanofiltration membranes are capable of rejecting multivalent salts and larger molecules, while selectively rejecting varying amounts of monovalent salts.

Purer™ CW-10X Series

These are liquid scale/corrosion inhibitors which are blended with inorganic phosphates, phosphonic acids, low molecular polymers and zinc. The powerful dispersant ... Read More

Purer™ CW-20X Series

These are all-organic, liquid scale/corrosion inhibitors which are blended with phosphonic acids and low molecular weight polymers. The powerful dispersant blended in... Read More

Purer™ Super Plus

Signature cooling water treatment for difficult cooling waters. Purer™ Super Plus provides strong corrosion inhibition and dispersion of hardness salts and metals oxides... Read More

Purer™ BD-10X Series

Series of bio-dispersants/bio-detergents/bio-penetrants... Read More

Purer™ Bio-10X Series

Choice of non-oxidizing biocides... Read More

Purer™ Bio-20X Series

Choice of oxidizing biocides... Read More

Purer™ PP-10X Series

Basket of products for precleaning and passivation... Read More

Purer™ CC-10X Series

These are corrosion inhibitors for closed circuit cooling water and hot water systems. They can be used in all closed systems such as cold water, hot water, brine and glycol systems... Read More

Purer™ BW-10X Series

These are products which react with the dissolved oxygen in the feedwater of steam boilers thus preventing corrosion due to oxygen in the boilers... Read More

Purer™ BW-20X Series

These are products that protect steam and condensate lines against corrosion... Read More

Purer™ BW-30X Series

These are products used to prevent corrosion and deposition in boilers... Read More

Purer™ EEI Plus

Purer™ EEI Plus is a powerful scale inhibitor with a high dispersive capacity for scale control inside multiple-effect evaporators. It exhibits wide range of activity on calcium carbonate and calcium sulphate scales and excellent anti-caking ability to prevent salt deposition from concentrated brines. A product of CSM Toray... Read More

RE 4040-BLN

Brackish 4 inch dia. Ro membrane which works in low pressure. A product of CSM Toray... Read More

RE 8040-BE34

Brackish 8 inch dia. Ro memberane with extended membrane area for increased permeate flow rate with 34 mil spacing between each wound. A product of CSM Toray... Read More

RE 8040-BLN

Brackish 8 inch dia. Ro memberane which works in low pressure. A product of CSM Toray... Read More

RE 8040-BLR440

Brackish 8 inch dia.ro memberane which works in low pressure and higher salt rejection with extended membrane area 440 sq. Ft.. A product of CSM Toray... Read More

RE 16040-BE

Brackish 16 inch dia. Ro membrane with extended membrane area for increased permeate flow rate. A product of CSM Toray... Read More

RE 16040-BLR

Brackish 16 inch dia.ro membrane which works in low pressure and higher salt rejection. A product of CSM Toray... Read More

RE 8040-BE

Brackish 8 inch dia. Ro memberane with extended membrane area for increased permeate flow rate. A product of CSM Toray... Read More

RE 8040-BE34

Brackish 8 inch dia. Ro memberane with extended membrane area for increased permeate flow rate with 34 mil spacing between each wound. A product of CSM Toray... Read More

RE 8040-BE 440

Brackish 8 inch dia. Ro memberane with extended membrane area 440 sq. Ft. For increased permeate flow rate. A product of CSM Toray... Read More

RE 8040-BN

Brackish 8 inch dia. Ro memberane with normal parameters. A product of CSM Toray... Read More

RE 8040-BR

Brackish ro membrane with higher salt rejection. A product of CSM Toray... Read More

RE 8040-BR400

Brackish 8 inch dia. Ro memberane with extended membrane area 400 sq. Ft. For increased permeate flow rate and higher salt rejection. A product of CSM Toray... Read More

RE 8040-BLF

Brackish 8 inch dia. Ro membrane which works in low pressure and higher flow rate. A product of CSM Toray... Read More

RE 8040-BLN

Brackish 8 inch dia. Ro memberane which works in low pressure. A product of CSM Toray... Read More

RE 8040-BLN440

Brackish 8 inch dia.ro memberane which works in low pressure with extended membrane area 440 sq. Ft.. A product of CSM Toray... Read More

RE 8040-BLR

Brackish 8 inch dia. Ro memberane which works in low pressure and higher salt rejection. A product of CSM Toray... Read More

RE 8040-BLR440

Brackish 8 inch dia.ro memberane which works in low pressure and higher salt rejection with extended membrane area 440 sq. Ft.. A product of CSM Toray... Read More

RE 4040-BE

Brackish 4 inch dia. Ro memberane with extended membrane area for increased permeate flow rate. A product of CSM Toray... Read More

RE 4040-BLF 

Brackish 4 inch dia. Ro memberane which works in low pressure and higher flow rate. A product of CSM Toray... Read More

RE 4040-BLN

Brackish 4 inch dia. Ro memberane which works in low pressure. A product of CSM Toray... Read More

RE 4040-BLR

Brackish 4 inch dia. Ro membrane which works in low pressure and higher salt rejection. A product of CSM Toray... Read More

RE 4021-BE

Brackish 4 inch dia. And 21 inch length ro memberane with extended membrane area for increased permeate flow rate. A product of CSM Toray... Read More

RE 4021-BLN

Brackish 4 inch dia. And 21 inch length ro memberane which works in low pressure. A product of CSM Toray... Read More

RE 2540-BE

Brackish 2.5 inch dia. Ro memberane with extended membrane area for increased permeate flow rate. A product of CSM Toray... Read More

RE 2540-BLN

Brackish 2.5 inch dia. Ro memberane which works in low pressure. A product of CSM Toray... Read More

RE 2521-BE

Brackish 2.5 inch dia. And 21 inch length ro memberane with extended membrane area for increased permeate flow rate. A product of CSM Toray... Read More

RE 2521-BLN

Brackish 2.5 inch dia. And 21 inch length ro memberane which works in low pressure. A product of CSM Toray... Read More

RE 16040-FEn

16 inch dia. Fouling resistant ro membrane with extended membrane area for higher permeate flow. A product of CSM Toray... Read More

RE 16040-FLR

16 inch dia. Fouling resistant ro membrane which works in lower pressure with higher salt rejection. A product of CSM Toray... Read More

RE 8040-FDn 

8 inch dia. Fouling resistant ro membrane with low differential pressure. A product of CSM Toray... Read More

RE 8040-FEn

8 inch dia. Fouling resistant ro membrane with extended membrane area for higher permeate flow. A product of CSM Toray.  ... Read More

RE 8040-FEn34

8 inch dia. Fouling resistant ro membrane with extended membrane area for higher permeate flow having 34 mil. Space between each wound. A product of CSM Toray... Read More

RE 8040-FEn440 

8 inch dia. Fouling resistant ro membrane with extended membrane area 440 sq. Ft. For higher permeate flow. A product of CSM Toray... Read More

RE 8040-FN

8 inch dia. Fouling resistant ro membrane with normal parameters. A product of CSM Toray... Read More

RE 8040-FL

8 inch dia. Fouling resistant ro membrane which works in lower pressure. A product of CSM Toray... Read More

RE 8040-FL440

8 inch dia. Fouling resistant ro membrane which works in lower pressure with area of 440 sq. Ft. For higher permeate flow rate. A product of CSM Toray... Read More

RE 8040-FLR 

8 inch dia. Fouling resistant ro membrane which works in lower pressure with higher salt rejection. A product of CSM Toray... Read More

RE 4040-FEn

4 inch dia. Fouling resistant ro membrane with extended membrane area for higher permeate flow. A product of CSM Toray... Read More

RE 4040-FL

4 inch dia. Fouling resistant ro membrane which works in lower pressure. A product of CSM Toray... Read More

RE 4040-FLR

4 inch dia. Fouling resistant ro membrane which works in lower pressure with higher salt rejection. A product of CSM Toray... Read More

Re 4040-shfRE 4040-SHF

4 inch dia. Sea water ro membrane with ultra high salt rejection with high flow rate. A product of CSM Toray... Read More

RE 16040-SHF

16 inch dia. Sea water ro mrmbrane with ultra high salt rejection with high flow rate. A product of CSM Toray... Read More

RE 16040-SHN

16 inch dia. Sea water ro membrane with ultra high salt rejection and normal flow rate... Read More

RE 8040-SHA400

8 inch dia. Sea water ro membrane with ultra high salt rejection and higher membrane area 400 sq. Ft. A product of CSM Toray... Read More

RE 8040-SHF

8 inch dia. Sea water ro membrane with ultra high salt rejection with high flow rate. A product of CSM Toray... Read More

RE 8040-SHF400

8 inch dia. Sea water ro mrmbrane with ultra high salt rejection with high flow rate and area 400 sq.ft. A product of CSM Toray... Read More

RE 8040-SHN 

8 inch dia. Sea water ro mrmbrane with ultra high salt rejection and noraml flow rate. A product of CSM Toray... Read More

RE 8040-SHN400

8 inch dia. Sea water ro membrane with ultra high salt rejection and normal flow rate and 400 sq. Ft. Area for higher permeate flow rate. A product of CSM Toray... Read More

RE 4040-SHF

4 inch dia. Sea water ro membrane with ultra high salt rejection with high flow rate. A product of CSM Toray... Read More

RE 4040-SHN

4 inch dia. Sea water ro membrane with ultra high salt rejection and normal flow rate. A product of CSM Toray... Read More

RE 2540-SHN

2.5 inch dia. Sea water ro mrmbrane with ultra high salt rejection and noraml flow rate. A product of CSM Toray... Read More

RE 8040 HUE

8 inch dia. Ultra pure water membrane with extended area for high permeate flow rate. A product of CSM Toray... Read More

RE 8040 HUE 440

8 inch dia. Ultra pure water membrane with extended area of 440 sq. Ft. For higher permeate flow rate. A product of CSM Toray... Read More

RE8040-UL

8 inch dia. Ultra pure water membrane which works in low pressure. A product of CSM Toray... Read More

RE 8040-UL440

8 inch dia. Ultra pure water membrane which works in low pressure with extended area of 440 sq. Ft. For higher permeate flow rate. A product of CSM Toray... Read More

NE 8040-90

8 inch nano filtration membrane for 80-90% salt rejection and for monovalent ion removal. A product of CSM Toray... Read More

NE 8040-70

8 inch nano filtration membrane for 40-70% salt rejection and for monovalent ion removal. A product of CSM Toray... Read More

NE 4040-90

4 inch nano filtration membrane for 80-90% salt rejection and for monovalent ion removal. A product of CSM Toray... Read More

NE 4040-70

4 inch nano filtration membrane for 40-70% salt rejection and for monovalent ion removal. A product of CSM Toray... Read More

NE 2540-90

2.5 inch nano filtration membrane for 80-90% salt rejection and for monovalent ion removal. A product of CSM Toray... Read More

NE 2540-70

2.5 inch nano filtration membrane for 40-70% salt rejection and for monovalent ion removal. A product of CSM Toray... Read More

RE 8040-CE 

8 inch chlorine resistant membrane with extended area for high permeate flow. A product of CSM Toray... Read More

RE 4040-CE

4 inch chlorine resistant membrane with extended area for high permeate flow. A product of CSM Toray.  ... Read More

Quality Assurance

We understand that stakeholder trust is the most important asset we can build in this business. Building this trust is much more than just keeping good relationships – we believe it is our commitment to the quality in the processes we follow that has helped us deliver top notch quality in the products, solutions and services that we offer.

Request for Quote

To request for quote simply fill out the form or call us at 1800-274-1113